Razor Ground Force Manuale del Proprietario

OWNERS MANUALRead and understand this entire manual before riding!Electric-Powered Go KartItem Number 300001-SL®

❏ 4A. ADJUSTING THE BELT. The circuit breaker (next to charger input port in Figure 7a) will automatically shut off the power to the motor in the eve

❏ 4B. WHEEL REMOVAL PROCEDURE. Occasionally the wheels need to be replaced when worn out. The front and rear wheels are iden-tical and can be interch

4B-3.) To replace a rear wheel, make sure the keys are properly seated in the axle and aligned with the key

Figure 12a Figure 12b 4C-4.) Remove the brake guard and, using the small Allen k

5. SAFETY THE FOLLOWING RECOMMENDATIONS ARE EXPECTED FROM: ASTM F1928-98, “STANDARD SAFETY GUIDE FOR CONSUMER RECREATIONALY USE OF FUN-CARTS”Go

6. ADDITIONAL RAZOR SAFETY WARNINGS WARNING: Maintain a hold on the steering wheel at all times. WARNING: Never use near steps or swimming

7. ILLUSTRATED PARTS BREAKDOWNSee Figure 14 (Specifications and parts list subject to change without notice)ITEM# DESCRIPTION

ILLUSTRATED PARTS BREAKDOWNFigure 14

8. RAZOR LIMITED WARRANTY & REGISTRATIONThe manufacturer warranties this product to be free of manufactur-ing defects for a period of 90 days from

SB 1918 (CALIFORNIA) DECLARATION:YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS SCOOTER/ELECTRIC VEHICLE. TO

NOTE: This manual contains many “Warnings” and “Cautions” concerning the consequences of failing to maintain, inspect or properly use your Groun

IMPORTANT!If your Razor has a problemcall Razor USA toll free(866) 467-2967QUESTIONS:Please read the owner’s manual thoroughly. If you still have ques

• Always check and obey any loacl laws or regulations which may affect the locations where the Ground Force may be used on public property. The Groun

NOTE: Do not activate the speed control on the setting wheel unless you are in a safe, outdoor environment. Use this product only in areas fre

WARNING: Failing to properly adjust and tighten the screws, nuts and bolts that affix the steering wheel and seat can cause you to lose control

Tighten securely. Position the tie-rod control arm onto the steering axle as shown in Figure 3a and install the washers and fixing bolt. Using a 10 mm

❏ 2D. Optional attaching the seat with seat belt assembly. Locate the four (4) long seat attachment screw and seat-belt assembly in the parts bag. Po

Figure 6a Figure 6b WARNING: Practice in an open area free from obstacl

❏ 2G. Circuit breaker. The circuit breaker (next to charger input port in Figure 7a) will automatically shut off the power to the motor in the event